Cogofɔli

A’ ye ɲiningali kɛ .

BUSBAR ka yɔrɔ min be ni warigwɛ ye, o be se ka NEV ka fanga yɛlɛma

NEV fanga dusukun labɛnna cogo tilennin na

Mobili kuraw (NEV) minw be yiriwara joona joona, u ka fanga be fɛɛn dɔw ɲini minw be se ka la a la, u be baara kɛ ka ɲɛ ani u be mɔgɔ tanga cogo min na, u ɲɔgɔn tɛ yen. Kuran tilanyɔrɔba -o sisitɛmu nunu kɔnɔ, BUSBAR ka yɔrɔ be yen. An ka BUSBAR Terminal Stamping Die min be ni warigwɛ ye ani a ka fanga ka bon, o tɛ baarakɛminan dɔrɔn ye; o ye fɛɛrɛ dɔ ye min dilanna ni hakiliman ye ani a labɛnna walisa ka nɛgɛjuruw dilan minw be fanga di kuran ka mobilite bɔnsɔn nata ma. An be baara kɛ ni stamping dies dilanni ye minw be Oxygène-Free Copper yɛlɛma ka kɛ BUSBAR terminals gɛlɛmanw ye, minw be se ka muɲu kosɔbɛ, ani u be ban ni warigwɛ nɛgɛman ye min be bɛn ɲɔgɔn ma, min be baara kɛ koɲuman, o bɛɛ labɛnna ka kɛɲɛ ni NEV ka baarakɛcogo gwɛlɛw ye.

Nin die b’an ka layidu yira i n’a fɔ Sinuwaw ka -based, source-tooling dilanbaga ka ɛnzeniyɛri ɲumanw, yɛlɛmani telimanw, ani nafa danfaraninw di k’a sɔrɔ an ma yɛlɛma don ɲumanya sariyaw la minw ɲinina diɲɛ kɔnɔ mobili ni kuran dilanyɔrɔw fɛ.

Fɛɛnw cogoya n’u ka kɛcogo jɔnjɔnw

Tabali nin be an ka saraka jɔnjɔnw n’a sekow lajɛ ka surunya o yɔrɔ kɔrɔtaninba nin na:

Paramɛtiri	Ɲɛfɔli / Ɲɛfɔli
Fɛɛn tɔgɔ	BUSBAR ka yɔrɔ min be ni warigwɛ ye, o be se ka NEV ka fanga yɛlɛma
Fɛɛn minɛnw	Okisijɛni-Zira gwansan T2 (C11000), a ka bon =1.5mm (A be se ka yɛlɛma jaaw kelen kelen bɛɛ la: 0.8mm - 3.0mm)
Tampasi kɛcogo	Tagamasiɲɛ die min be taga ɲɛ (a yɛrɛ ma, teliyaba-)
Die labɛncogo	Modulari, Tiɲɛn-Ɲɛyirali ɲɛtaga Die. A be ni yɛlɛmani telimanw ye, a be ni pɔtɔpɔtɔw ye minw be bilasira, ani a be se ka mɔgɔw lawuli ka baara kɛ wagati dɔɔni kɔnɔ ani k’u ladon nɔgɔman na.
Dugukolo furakɛli (yɔrɔ)	0.5μm Warijɛ (Ag) yɔrɔ min ka dɔgɔ. Die labɛnna walisa a ka se ka nɔrɔ ɲɔgɔn na cogo kelen na ani ka yɔrɔ laban min sɛbɛra, a kana yɛlɛma wala a kana bɛn ɲɔgɔn ma.
Fɛɛrɛ min be baara kɛ ni fɛɛrɛ jɔnjɔnw ye	Ɲɛyirali fɛ, sɔgɔli ɲuman, juru teliman-Tigɛli (HS-WEDM), CNC masin, porofayili sɔgɔli, kuran bɔli masin (EDM).
Dilanni se	A be se ka dɛmɛ don -ba bɔli la min ka ca ni10 miliyɔn kalo o kalo, ka kɛɲɛ ni yɔrɔ dɔw ka gwɛlɛya n’u ka tɔni hakɛ ye.
Baarakɛminanw sariyaw	A be baara kɛ ni diɲɛ sariyaw ye:Mɛsiburgɛri, Hasiko, Misumi, niDMEka ɲɛsin muguw sigiyɔrɔw ma, ɲɛminɛfɛnw ani minanw ma, minw b’a to mɔgɔw be se ka ɲɔgɔn yɛlɛma ani u be se ka la u la duniɲa kuru bɛɛ kɔnɔ.
Die minɛnw	SKD11 (minw be kɛ ka pɔtɔpɔtɔw/fɛnw dilan), CD650 (minw be don mɔgɔw la minw ka teli), ASP23/ASP60 (minw be teliya, minw be boli wagatijan kɔnɔ), Ceratizit CFs H40S (karibidi be kɛ yɔrɔ minw na).
Aplikasiyɔn laɲininw	NEV (BEV, PHEV) Fangalanw (Batiriw, yɛlɛmalanw, DC-DC yɛlɛmalanw, yɛlɛmalanw minw be yɛlɛma). Aerospace fanga tilanyɔrɔ, furakɛli jaaw bɔli minanw, lizinibaara kɔlɔsili fɛɛrɛw minw ka ɲi ka ɲɛ, elekitoroniki ɲɔgɔndan min ka ɲi ka ɲɛ.
Garanti ka ɲɛnamaya	10 miliyɔn ɲɔgɔnnaka kɛɲɛ ni ladonni sariyaw ye, minan ɲumanw, funteni furakɛcogo tigitigi ani dilancogo barikaman sababu fɛ.

An ka nafa jɔnjɔn: Bespoke Precision Nɛgɛ Stamping Die Yiriwali

An tɛ baarakɛminanw feerebaga dɔrɔn ye; an ye aw ka fɛnw ni baarakɛminanw yiriwali baarakɛɲɔgɔnw ye. An ka fanga b’a la k’i ka miiriya n’i ka baarakɛcogo bayɛlɛma ka kɛ fɛn ye min be baara kɛ koɲuman ani a be mɛn.

Ɛnsɛniyeri baara dafanin: Ka bɔ i ka 2D/3D yɔrɔ jaaw fɔlɔw la (IGES, STEP, CATIA, UG, SolidWorks cogoyaw), an ka baarakɛlaw ka jɛnkulu min be baara kɛ ni lɔnniyaba ye, olu be DFM (Dɛsɛli kɛ ka se ka dilan) sɛgɛsɛgɛri kɛ ka ɲɛ. An be koo minw be se ka kɛ sababu ye ka fɛnw dilan, an be yɛlɛmaniw ladili u ka wari hakɛ n’u ka baarakɛcogo kama ani k’a lajɛ ni yɔrɔw dilancogo ka ɲi ka se ka fɛnw sɛgɛsɛgɛ minw be sɔrɔ kosɔbɛ.

Ɲɛyirali min be kɛ ni CAE ladegili ye: Sanni an ka nɛgɛ sifa o sifa tigɛ, an be baara kɛ ni CAE (Ɔridinatɛri-Dɛmɛbaga ye) Forming Simulation (an be baara kɛ ni porogramu dɔw ye i n’a fɔ AutoForm wala Dynaform). O yɛlɛmani kɔrɔtanin be minanw bolicogo, gɛlɛya/gɛlɛya tilannin, yɛlɛmani minw be se ka kɛ, yɛlɛmani, ani ka kɔrɔbɔli sɔngɔ gwɛlɛw bɔ yen-ani-filiw la. An be gwɛlɛyaw ɲɛnabɔ virtuel stade la, ka sira ɲuman garanti ka taga baarakɛminan farikoloman dɔ la min be se ka ɲɛtaga sɔrɔ.

Yiriwali taabolo min be ɲɔgɔn minɛ: An ka baara dafanin-b'a to poroze be taga ɲɛ:

BaarakɛminanwDan: 3D/2D die labɛncogo ani labɛncogo fɛsɛfɛsɛninw.

Minɛnw sugandili: Ladili di baarakɛminan ɲumanw koo la nɛgɛ/karibidi kan ka kɛɲɛ ni minanw ye, u hakɛ ani u makoya tigitigiw ye.

Dilanni tigitigi: An ka layidu minw ta ɛnzeniyɛri ani ɲumanya koo la, u be dɛmɛ ni wari caaman ye min be don dilanfɛnw ni sumali fɛɛrɛw la, Lisiba i n’a fɔ a be sɔrɔ cogo min na:

Minɛn suguya	Modɛli ani hakɛ	Seko jɔnjɔn / Tiɲɛn
EDM (Jiminɛbaga)	Sodiki AD32LS, Makino EDG2/EDG3 (o bɛɛ lajɛnnin ye 6 ye)	Woo gɛlɛnw dilanni, a sanfɛla laban Ra<0.4μm.
Juru-EDM tigɛ	Sodiki AQ360LS, Seibu M50B (o bɛɛ lajɛnnin ye 7 ye)	Tigɛli ɲumanba-teliya, tigɛli nɔgɔman, sigiyɔrɔ tilennin ±0.002mm.
Sanfɛla sɔgɔlan	Yutɔn 618S (10 ɲɔgɔn)	O yɔrɔ pɛtɛninw ka sɔgɔli ɲuman, paralɛlisimu be 0,002mm kɔnɔ.
Profayili sɔgɔlan	Waida (yɔrɔ 2)	Pɔnsi gɛlɛmanw ani die porofayiliw muguci tigitigi.
CMM	CMM sɛgɛsɛgɛrikɛla (1)	3D sɛgɛsɛgɛri dafanin, tiɲɛn fɔɔ ka se (1.8+L/350)μm ma.
Projɛktɛri optiki	Nikɔn V-12B (fɛn 3)	2D lamini sumani, bonya fɔɔ ka se 100X ma.
Janyamɛtiri	Nikɔn * 8	Dunni ni janya sumanin, +-0.001mm

Baarakɛminanw so yiracogo yiriwalen

Sodiki juru-Tigɛli

Seibu juru-Tigɛli

Dugukolo sɔgɔli

CNC baarakɛyɔrɔ

Profayili sɔgɔli

Makino EDM

Minɛnw lajɛnba

Sɛgɛsɛgɛli so

Sodiki EDM

Nikon porojɛktɛri

Heksagɔni CMM

2.5D porozekitɛri

Lajɛnba & Lajɛ-Bɔ: Fɛɛrɛkɛlaw minw be se baara la koɲuman, olu be ɲɔgɔn lajɛn ani ka sɛgɛsɛgɛri fɔlɔw kɛ an ka so kɔnɔ (25-110 Tonnage range) kan.

Kɔrɔbɔli dilanni ani labɛnni:An be sɛgɛsɛgɛri fitininw kɛ, ka sɛgɛsɛgɛri kɛ ni minanw ye minw be se ka baara kɛ ni minanw ye (Hexagon CMM, Nikon Projector), ani ka sɛgɛsɛgɛri kɛ ka ɲɛ walisa ka se ka yɔrɔw hakɛ dafa.

Ka fɛnw dilan ka caya: An be dilanfɛn dɔ dilan-labɛnnin, min be ni sɛbɛw dafaninw ani baarakɛcogo paramɛtiriw ye.

-Dɛmɛ min be kɛ ka sɛbɛri kɛ ka caya

Dieba mako be yɔrɔ la min be se ka baara kɛ. An b’an janto a la ko aw ka yɔrɔw be se ka dilan ka kɛɲɛ ni ɲɔgɔn ye.

-So kɔnɔSɛnɛ Minanw (Ka fɛnw dilan + Tagamasiɲɛ):

35+ pikirikɛlanw dilan cogo ɲuman na (30T~300T) ka bɔ suguba la,
18+ sɛgɛsɛgɛrikɛlanw minw be baara kɛ ni sɛgɛsɛgɛrikɛlanw ye ani u be baara kɛ ni teliya ye ((25T~110T) ka bɔ yɔrɔbaw la.
15+ saanw ka OEM/ODM lɔnniya.
Laban-ka-laban fɛɛrɛw la k’a ta dilanni na ka taga a bila dili la.

Selili min dilanna: Poroze dɔw kama i n’a fɔ High-Voltage BUSBAR Terminal, an be se ka baarakɛyɔrɔ dɔ sigi sen kan, min be balofɛnw don u yɛrɛ ma, ka in-line vision inspection kɛ, ani ka fɛnw ladon, k’a to a ka se ka bɔ boonw kɔnɔ ka taga se yɔrɔ minw banna ani u sɛgɛsɛgɛra.

Ɲɛyirali: An ka baarakɛyɔrɔ n’an ka baarakɛɲɔgɔnw ka jɛnkulu b’a to an be se ka baara kɛ ka caya walisa ka se ka mɔgɔw mako wasa, o min be se ka kɛ sababu ye ka fɛɛnw dilan aw ka NEV porogramuw kama minw be se ka la a la.

Dilanyɔrɔ yiracogo

Mouli dilanyɔrɔ 01

Mouli dilanyɔrɔ 02

Mouli dilanyɔrɔ 03

Silikɔni mugu dilanyɔrɔ

Tampari dilanyɔrɔ

Lajɛnba yɔrɔ min be kɛ a yɛrɛ ma

Kɔlɔsili gwɛlɛ: A be sɔrɔ baarakɛcogo bɛɛ la

Komi ISO9001&IATF16949&ISO14000 ka sɛbɛw b’a la, an ka ɲi ka baara kɛ yɔrɔ bɛɛ la, k’a ta minanw sɛgɛsɛgɛri ma ka taga a bila u ci laban na.

Minɛn minw be don QC

Nɛgɛ minanw bɛɛ ani u kɔnɔfɛn minw be bɛn ni sariyaw ye, u sɛbɛra ani u sɛgɛsɛgɛra ka kɛɲɛ n’u ka sugu n’u ka janya ye.

Sɛbɛnw bɛɛ

Sɛgɛsɛgɛri rapɔɔri dafanin dɔ, min be ni minanw ka sɛbɛw ye, fɔlɔ-sɛgɛsɛgɛri (FAI) kunnafoniw ani misaliya yɔrɔw, be taga ni die kelen kelen bɛɛ ye min be di.

-Tagabolo sɛgɛsɛgɛli kɔnɔ (IPQC)

Masini baara yɔrɔ: Fɛɛn kɔrɔtaninw be suma ni Nikon ka porozekitɛriw ye (3) ani Nikon ka altimɛtiriw (8) sɔgɔli ni nɛgɛ-tigɛnin kɔ. O la, a be se ka sɛgɛsɛgɛri kɛ Wanhao 2D porozekitɛriw kan (4 unités).

Ka kɔn -Lajɛn ɲɛ: Sɛgɛsɛgɛri be kɛ ka kɔn lajɛnba laban ɲɛ walisa k’a lɔn n’u be bɛn ɲɔgɔn ma.

Sɛgɛsɛgɛri laban ani seko kalan

Fɔlɔ-off misaliya minw bɔra try-out la, u sumana koɲuman n’an ka Hexagon CMM Inspector ye ka rapɔɔri dafalen di i ka GD&T welekanw ma.

We perform a CPK (Process Capability Index) study on critical dimensions (e.g., terminal pin width: 2.50±0.03mm, pin spacing: 5.00±0.05mm) using data from multiple consecutive strokes to statistically prove the die's stability and capability (target CPK >1.33).

Laboratuwari min be fɛɛnw sɛgɛsɛgɛ ka ɲɛ

Insulasiyɔn ka fanga sɛgɛsɛgɛbaga

Hi-daga sɛgɛsɛgɛbaga

Janya sɛgɛsɛgɛbaga

Kɔgɔ-fiyɛri sɛgɛsɛgɛbaga

Masini min be funteni ni jimanya tuma bɛɛ

Porofayili porozekitɛri

Kulɛri danfara jatelan

Fanga marali sɛgɛsɛgɛlikɛla

Indexer de flux melt

Terminali yɔrɔ sɛgɛsɛgɛlikɛla

Funteni yɛlɛli sɛgɛsɛgɛbaga

CMM 3D

Laser yɛlɛmani sumalan

Plating gɛrɛntɛ sɛgɛsɛgɛbaga

Yɛrɛyɛrɛ sɛgɛsɛgɛlikɛla

Rezo sɛgɛsɛgɛlikɛla min be baara kɛ ni frekansiba ye

ROHS sɛgɛsɛgɛlikɛla

NEV ka baarakɛcogo dalilu

Sisitɛmu	waleyali	Sɛgɛsɛgɛri kunnafoniw
Batiri	Seliliw be ɲɔgɔn minɛ yɔrɔ minw na	0 foro dɛsɛra 500,000+ kɔnɔ (2023)
Motɛri kɔlɔsibaga	SiC yɛlɛmalanw	175 degere baara min be kɛ tuma bɛɛ, o sɛgɛsɛgɛra
PDU	Tilanyɔrɔba	A tɛmɛna 50kA surun -sɛgɛsɛgɛli la (ISO 6469-3)
-yɔrɔ caman kɔlɔsilikɛla	Zonal daa nɔrɔnanw	EMC shielding >60dB @ 1GHz
Chargeur yɔrɔ	CCS ɲɔgɔndan yɔrɔ	10,000 ɲɔgɔndan yɛlɛmaniw @ IP6K9K jate

Fɛɛrɛw baarakɛɲɔgɔnya labɛnnin

product-1195-601

Kalan min kɛra

Poroze min be baara kɛ

800V pilatifɔmu Tier 1 dilanbaga BYD Blade batiri sisitɛmu kama

Dili baara

-so kɔnɔ baarakɛminanw yiriwali+30tile kɔnɔ baarakɛminanw labɛnnin lo ka dilan ka caya

Baarakɛcogo ɲuman

PPM 0 marala kalo 18 kɔnɔ

Saan o saan, min be ɲini

8M pc

Mun na an ka ɲi ka jɛn n’an ye? Nafa min ka bon ni sɔngɔ ye

Komi an ye baarakɛminanw dilanbaga ye Sinuwa jamana na, an be nafa caaman di:

Musaka-Ɲɛyirali ɲuman

A’ ye cɛmancɛ tagamasiɲɛw bɔ yen. An be baarakɛminan ɲumanw di sɔngɔ ɲuman na n’an be baarakɛminanw dilan cogo ɲuman na, n’an be baara kɛ ni sigida ka minanw ye ani n’an be baara kɛ ka ɲɛ.

Teliya ani teliya

An ka ɛnzeniyɛri jɛnkulu min sinsinnin lo ani an ka ɲɛminɛcogo b’a to an be se ka ɲiningaliw jaabi joona ani yɛlɛmani minw be kɛ dilan cogo la. O la, lɔgɔkun 8-10 lo be se ka kɛ lɔgɔkun 8-10 kɔnɔ, k’a ta a ka komandi ma ka taga a bila a ka sɛgɛsɛgɛri fɔlɔ la.

Jɛɲɔgɔnya wagatijan-

An be poroze kelen kelen bɛɛ jati i n’a fɔ jɛnɲɔgɔnya jan- daminɛ, min be to ka dɛmɛ don fɛɛrɛw la, ka ladili di i ka baarakɛminanw ladonni koo la ani ka ɲɛnamaya kɛcogo ɲɛnabɔ.

Aw ka ɲɔgɔnye kɛ n’an ye bi ka baro kɛ aw ka BUSBAR Terminal kɛrɛnkɛrɛnninw kan minw ka fanga ka bon wala aw ka sɛgɛsɛgɛri kɛcogo wɛrɛw kan. An ka ɛnzeniyɛriw ka jɛnkulu ka DFM sɛgɛsɛgɛri fɛsɛfɛsɛnin dɔ kɛ ani ka ɲɔgɔndan sɔngɔ dɔ di, k’a yira cogo min na an be se ka kɛ i ka baarakɛɲɔgɔn ye min be se ka la a la nɛgɛw sɛgɛsɛgɛri la.

Ɲiningali ci sisan

Tagasogow: bisiw lɔyɔrɔw tagamasiɲɛw sa, Sinuwaw ka bisiw lɔyɔrɔw tagamasiɲɛw sara dilanbagaw, feerekɛlaw, izini